當前位置：首頁>產品－標準編號
ANSI/BIFMA X5.1 - 2017 General-purpose Office Chairs
時間：2020-09-17 訪問量：11747
| Edition: 20200621 更新 | ||||||||
| Section | Section Description | Summary of important content | 重要內容摘要 | |||||
| 1 | Scope | 1. NHANES 2007-2010 study, which indicates the weight of the 95th percentile male is 125 kg (275 pounds), was used in the development of the tests. 2. The tests were developed with an estimated product life of ten years based on single-shift usage. 3. ISO 17025 requirements for measurement uncertainty do not apply to this standard. | 1. NHANES 2007-2010年的研究表明，95%的男性的體重為125公斤(275磅)，本標準的加載重量采用了這個數據。 2. 本標準規定的測試參數是基于產品壽命估計為10年的日常辦公使用情況擬定的。 3. 有關ISO 17025 測量不確定度的要求不適用于本標準。 | |||||
| 2 | Definitions | 1. Arena folding chairs are not covered in the ANSI/BIFMA X5.1 standard. 2. Standard folding chairs are not covered in the ANSI/BIFMA X5.1 standard. | 1. 競技場折疊椅不在本標準規管范圍內。 2. 標準折疊椅不在本標準規管范圍內。 | |||||
| 3 | General | In order for measurements to be "universally" acceptable, only Chair Measuring Devices (CMD) built to BIFMA or ISO specifications may be used. | 為了使測量數據能夠被廣泛接受，只有通過符合BIFMA或ISO的座椅測量裝置(CMD)（測試的數據）才能被認可。 | |||||
| 4 | General test conditions | |||||||
| Section | Section Desc | 章節內容 | KW Model | KW Model Desc | 儀器名稱 | 圖片 | 產品資料 | 操作視頻 |
| 1 | Scope | 范圍 | / | / | / | / | / | |
| 2 | Definitions | 定義 | / | / | / | / | / | |
| 2.4 | CMD | 美標坐具尺寸測量加載治具 | KW-BFM-01 | BIFMA Chair Measuring Device （CMD） | 美標坐具尺寸測量加載治具(俗名：BIFMA CMD) |  |  | |
| KW-BSE-60 | ISO CMD | ISO CMD |  | |  | |||
| 2.10 | Form-fitting device | 靠背加載墊 | KW-BFM-03 | Chair Back Form-fitting Device | BIFMA坐具靠背加載墊 |  | | |
| 3 | General | 一般要求 | / | / | / | / | / | |
| 4 | Types of Chairs | 辦公椅分類 | / | / | / | / | / | |
| 5 | Backrest Strength Test - Static - Type l and II | 第I和II類辦公椅的靠背強度測試 | KW-BFM-13 | Chair strength tester for BIFMA | BIFMA坐具結構強度試驗機 |  | | |
| 6 | Backrest Strength Test - Static - Type lll | 第III類辦公椅的靠背強度測試 | KW-BFM-13 | Chair strength tester for BIFMA | BIFMA坐具結構強度試驗機 | | | |
| 7 | Drop Test - Dynamic | 動態強度沖擊測試 | KW-BFM-11 | Seating Impact Tester | 坐具座面沖擊測試機 |  | | |
| 8 | Swivel Test - Cyclic | 旋轉耐久測試 | KW-BFM-09 | Chair swival test rig | 椅子旋轉耐久測試機 |  | | |
| 9 | Tilt Mechanism Test - Cyclic | 后傾機構耐久測試 | KW-BFM-10-BP | Chair backrest tester for BIFMA - Back pull | 椅子靠背耐久測試機-后拉式 |  | | |
| KW-BFM-10-FP | Backrest tester for BIFMA III chair - Front push | 椅子靠背耐久測試機-前推式 |  | | ||||
| 10.3 | Seating Durability Tests - Cyclic | （座面）沖擊耐久測試 | KW-BFM-11 | Seating Impact Tester | 坐具座面沖擊測試機 |  | | |
| 10.4 | eating Durability Tests - Cyclic | （座面）前角交替壓力耐久測試 | KW-BSE-16 | Arm rest tester | 坐具扶手試驗機 |  | | |
| 11.3 | Stability Tests - Front Stability | （辦公椅）后傾穩定性測試 | KW-BFM-05-MS | Chair Rear Stability Test Disc | 坐具后穩定性測試加載模塊 |  | | |
| KW-BFM-05-PP | Support PP sheet for reclining seat of back rest stability testing | 具有靠背后傾機構的坐具后穩定性測試加載塑膠膜片 |  | | ||||
| KW-BFM-46 | Template for rear stability test of BIFMA X5.1 | BIFMA坐具后穩定性加載點模板 |  | | ||||
| 11.4 | Stability Tests - Front Stability | （辦公椅）前傾穩定性測試 | KW-BFM-12 | Seating stability test table for single station | 單工位坐具穩定性測試臺 |  | | |
| KW-BFM-12-03-BFM | Seating stability loading pad for BIFMA | 坐具前穩定性測試輔助加載制具-BIFMA |  | | ||||
| KW-BFM-12-06 | Unit of loading mass & fixture for single seating stability testing | 座位坐具穩定性加載砝碼和治具套裝 |  | |||||
| KW-BFM-47 | Front Stability Load Locator Fixture | 椅子前穩定性測試加載點確認治具 |  | | ||||
| 12 | Arm Strength Test - Vertical - Static | 扶手垂直強度測試 | KW-BFM-13 | Chair strength tester for BIFMA | BIFMA坐具結構強度試驗機 |  | | |
| 13 | Arm Strength Test - Horizontal - Static | 扶手水平強度測試 | KW-BFM-13 | Chair strength tester for BIFMA | BIFMA坐具結構強度試驗機 | | | |
| 14 | Backrest Durability Test - Cyclic - Type I | 第I類（辦公椅）靠背耐久測試 | KW-BFM-10-BP | Chair backrest tester for BIFMA - Back pull | 椅子靠背耐久測試機-后拉式 |  | | |
| 15 | Backrest Durability Test - Cyclic - Type II & III | 第II和III類（辦公椅）靠背耐久測試 | KW-BFM-10-BP | Chair backrest tester for BIFMA - Back pull | 椅子靠背耐久測試機-后拉式 | | | |
| KW-BFM-10-FP | Backrest tester for BIFMA III chair - Front push | 椅子靠背耐久測試機-前推式 | | | ||||
| 16 | Caster/Chair Base Durability Test - Cyclic | （辦公椅）腳輪耐久測試耐久測試 | KW-BFM-17-1 | One-station Chair caster durablity tester | 單工位椅子腳輪耐久測試機 |  | | |
| KW-BFM-17-2 | Two-stations Chair caster durablity tester | 雙工位椅子腳輪耐久測試機 |  | | ||||
| KW-BFM-17-4 | Four-stations Chair caster durablity tester | 四工位椅子腳輪耐久測試機 |  | | ||||
| 17 | Leg strength Test - Front and Side Application | （第III類辦公椅）椅腿強度測試 | KW-BFM-13 | Chair strength tester for BIFMA | BIFMA坐具結構強度試驗機 | | | |
| 18 | Footrest Static Load Test - Vertical | （辦公椅）腳踏垂直強度測試 | KW-BSE-16 | Arm rest tester | 坐具扶手試驗機 |  | | |
| 19 | Footrest Durability Test - Vertical - Cyclic | （辦公椅）腳踏垂直耐久測試 | KW-BSE-16 | Arm rest tester | 坐具扶手試驗機 | | | |
| 20 | Arm Durability Test - Cyclic | 扶手耐久測試 | KW-BSE-16 | Arm rest tester | 坐具扶手試驗機 | | | |
| 21 | Out Stop Tests for Chairs with Manually Adjustable Seat Depth | 座面具有滑動功能的撞擊測試 | KW-BFM-62 | Out Stop Tests for Chairs with Manually Adjustable Seat Depth | 椅子座面滑動撞擊測試機 | |||
| 22 | Tablet Arm Chair Static Load Test | （附著在辦公椅上的）寫字板結構強度測試 | KW-BFM-10-FP | Backrest tester for BIFMA III chair - Front push | 椅子靠背耐久測試機-前推式 |  | | |
| KW-BFM-54 | Load pad for BIFMA tablet | 直徑8寸加載墊 | ||||||
| 23 | Tablet Arm Chair Load Ease Test - Cyclic | （附著在辦公椅上的）寫字板循環靜載測試 | KW-BFM-10-FP | Backrest tester for BIFMA III chair - Front push | 椅子靠背耐久測試機-前推式 | | | |
| KW-BFM-54 | Load pad for BIFMA tablet | 直徑8寸加載墊 | ||||||
| 24 | Structural Durability | （第III類辦公椅）搖晃耐久測試 | KW-BFM-49 | Structural durability test for BIFMA III chair | 第三類椅子搖晃耐久試驗 | |||
| Appendix C | Base Test - Static | （辦公椅）五星腳耐壓力測試 | KW-BFM-07 | hair Base Comprssion Tester | 椅子五星腳耐壓力試驗機 |  | | |
| Appendix D | Front Stability Load Locator Fixture | （辦公椅）前穩定性加載點定位治具 | KW-BFM-47 | Front Stability Load Locator Fixture | 椅子前穩定性測試加載點確認治具 |  | | |
| Appendix F | Template for Rear Stability | （辦公椅）后穩定性加載點定位模板 | KW-BFM-46 | Template for rear stability test of BIFMA X5.1 | BIFMA坐具后穩定性加載點模板 |  | | |
售前咨詢專員